Security update for Parallels RAS (October 2026): Node.js and .NET components, status and optional precaution

4 users found this article helpful

Overview

In October 2026, Node.js published security updates, including a fix for CVE-2026-111497 in its bundled Brotli data-compression component. Parallels RAS uses Node.js in the RAS User Portal on the Secure Gateway. Because of this, some security scanners may flag RAS Secure Gateway servers. Many vendors are issuing updates for this component, not only Parallels.

Our engineering team has reviewed the issue. RAS does not use the affected Brotli decoder directly, and we have not identified a direct exposure. We are not aware of any customer being affected by an exploit. As a precaution, and to make sure the latest security patches are applied, we have updated the Node.js component in all supported versions. The .NET runtime has also been updated to the latest security release in all supported versions.

Current status

The updates are available for all supported versions:

Version Scope Status
RAS 21.2 (current GA) Node.js component updated to 24.22.1 (v21.2.2.1-27432).
.NET updated to 10.0.114 (v21.2.2.2-27433).
Available — Parallels RAS Core v21.2.2.2-27433 (28 October 2026) includes both updates
RAS 20.2 Node.js component updated to 22.23.4 (v20.2.4.3-26060).
.NET updated to 8.0.427 in RAS Core, RAS PowerShell, and RAS REST API (v20.2.4.4-26064).
Available — Parallels RAS Core v20.2.4.4-26064 (30 October 2026) includes both updates
RAS 22.0 Node.js component updated to 24.22.1.
.NET updated to 10.0.114 in RAS Core, RAS PowerShell, RAS REST API, and Management Portal.
Available — Parallels RAS v22.0-28160 (29 October 2026) includes both updates

This article will be updated if further builds are released.

Recommended action

No other action is required in the meantime.

Optional: additional precaution until you can update

This step is not required. If you want an extra precaution before you install the update, for example on an older version, you can temporarily disable the User Portal on your RAS Secure Gateways. This precaution applies only to the User Portal. The Parallels Client is not affected, so users can keep connecting with it.

  1. In the RAS Console, go to Farm > <Site> > Secure Gateways.
  2. Right-click a Secure Gateway and select Properties.
  3. Open the User Portal tab.
  4. If Inherit default settings is selected, clear it.
  5. Clear Enable User Portal.
  6. Click OK, then click Apply in the RAS Console.
  7. Repeat these steps for every Secure Gateway in the Farm.

Steps to disable the User Portal on a RAS Secure Gateway

Note: The User Portal tab is available only when the Secure Gateway is in Normal mode.

Important: While the User Portal is disabled, users cannot connect from a web browser and must use the Parallels Client.

How to re-enable the User Portal

After you install the update, re-enable the User Portal on each Secure Gateway. Select Enable User Portal again, or select Inherit default settings if the gateway used the Site defaults before.

For more information, see Enable or disable User Portal in the Parallels RAS Administrator's Guide.

Was this article helpful?

Tell us how we can improve it.