Network issues in Windows virtual machine

818 users found this article helpful

 

Symptoms

Cause

Resolution

  1. Make sure your Mac is connected to the internet, Windows will not be able to access the internet if it's disconnected or inaccessible on the Mac side.
     
  2. Before going any further please take a snapshot (Actions > Take Snapshot) to be able to revert back to a pre-troubleshooting point.
     
  3. Reinstall Parallels Tools.
     
  4. Perform clean boot in Windows by disabling 3rd party applications' services including 3rd party antivirus software which may have a negative impact on a network driver's installation.
    NOTE: in step 3 keep both Parallels Tools services enabled.


     
  5. Go to the virtual machine's configuration > Hardware > Source > Shared Network (Recommended) option should be set by default.
    If you have already got Shared network set but still experience network issues in Windows switch it to Bridged Network: Default Adapter and verify if the internet is working in any of these modes.



    If this helped and internet connection restored, enable all services back one-by-one to identify the problematic 3rd party application.
    If internet is accessible in one of the modes - either Shared or Bridged but having a different connection type set doesn't suit your needs, proceed to additional troubleshooting.
     
  6. Open Command Prompt in Windows by clicking on Start menu and typing in cmd in Search field, then hit Enter.
    Try to ping any Parallels server by entering the following command:

    ping parallels.com

    A normal output looks somewhat like this:

    Reply from 64.131.89.6: bytes=32 time=188ms TTL=54
    Reply from 64.131.89.6: bytes=32 time=187ms TTL=54


    If you get the following reply:

    Request timed out.
    Request timed out.


    Reset Windows TCP/IP protocol using the following commands:

    netsh winsock reset
    netsh int ip reset reset.log


    Then close Command Prompt window and restart Windows.
    If after Windows restart internet is not working, open Command Prompt again, release and renew IP address by entering the commands below:

    ipconfig /release
    ipconfig /renew
     
  7. If setting neither Shared nor Bridged type or releasing and renewing IP address helped and there is still no internet connection in Windows.
    Open Device Manager in Windows by clicking on Start menu and typing in devmgmt in Search field, then hit Enter.
    In Device Manager go to Network adapters tab and expand it. Check the network adapter's name which should be one the following ones:

    Intel® PRO/1000 MT
    Intel® Gigabit CT (82574L)
    Realtek RTL8029AS

    If you see any other name (e.g. Ethernet Controller) or the adapter has an exclamation mark > right click it > choose Uninstall device, then install Parallels Tools again (Actions > Reinstall Parallels Tools).
     
  8. If none of the above helped, scan your system for integrity violations.
     
  9. When the issue is resolved remove the snapshot taken in step 2 by going to Actions > Manage Snapshots > choosing the snapshot > pressing Delete > Yes.


     

Additional information

If you have Parallels Desktop for Mac Pro or Business edition you can reset preset network settings for the whole Parallels Desktop application by going to    > Preferences > Network > Restore Defaults.

Was this article helpful?

Tell us how we can improve it.